Техническая Инструкция для Cisco Cisco ONS 15454 SONET Multiservice Provisioning Platform (MSPP)
Use PAT to Establish a Session Between CTC and
ONS 15454 when CTC is Inside the Firewall
ONS 15454 when CTC is Inside the Firewall
Document ID: 63775
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
Background Information
Topology
Configure
Network Diagram
Configurations
Cisco ONS 15454 Configuration
PC Configuration
Router Configuration
Verify
Verification Procedure
Troubleshoot
Related Information
Prerequisites
Requirements
Components Used
Conventions
Background Information
Topology
Configure
Network Diagram
Configurations
Cisco ONS 15454 Configuration
PC Configuration
Router Configuration
Verify
Verification Procedure
Troubleshoot
Related Information
Introduction
This document provides a sample configuration for Port Address Translation (PAT) to establish a session
between Cisco Transport Controller (CTC) and ONS 15454 when CTC resides inside the firewall.
between Cisco Transport Controller (CTC) and ONS 15454 when CTC resides inside the firewall.
Prerequisites
Requirements
Ensure that you meet these requirements before you attempt this configuration:
Have basic knowledge about Cisco ONS 15454.
•
Know which Cisco Routers support PAT.
•
Components Used
The information in this document is based on these software and hardware versions:
Cisco ONS 15454 version 4.6.X and later
•
Cisco IOS® Software Release 12.1(11) and later
•
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.