Технические ссылки для Cisco Cisco ONS 15454 SDH Multiservice Provisioning Platform (MSPP)
1
Cisco ONS 15454 SDH Release 4.5 Network Element Defaults
78-15776-01
Network Element Defaults
This document describes the factory-configured (default) network element (NE) settings for the Cisco
ONS 15454 SDH. It includes descriptions of card default settings and node default settings and provides
procedures for importing, exporting and editing the settings. Cards supported by this platform that are
not listed in this document are not supported by factory-configured NE default settings.
ONS 15454 SDH. It includes descriptions of card default settings and node default settings and provides
procedures for importing, exporting and editing the settings. Cards supported by this platform that are
not listed in this document are not supported by factory-configured NE default settings.
To change card settings individually (that is, without changing the defaults), refer to the Change Card
Settings chapter of the Cisco ONS 15454 SDH Procedure Guide. To change node settings, refer to the
Change Node Settings chapter of the Cisco ONS 15454 SDH Procedure Guide.
Settings chapter of the Cisco ONS 15454 SDH Procedure Guide. To change node settings, refer to the
Change Node Settings chapter of the Cisco ONS 15454 SDH Procedure Guide.
Network Element Defaults Description
The NE defaults are pre-installed on each Cisco ONS 15454 SDH (on the TCC2 cards). They also ship
as a file called 15454SDH-defaults.txt on the CTC software CD in the event you want to import the
defaults onto existing TCC2 cards. The NE defaults include card-level and node-level defaults.
as a file called 15454SDH-defaults.txt on the CTC software CD in the event you want to import the
defaults onto existing TCC2 cards. The NE defaults include card-level and node-level defaults.
Changes made manually using Change Card Settings procedures in the Cisco ONS 15454 SDH
Procedure Guide override default settings. If you use the Defaults Editor or import a new defaults file,
the default changes do not change the settings for cards that are currently installed or slots that are
pre-provisioned for cards.
Procedure Guide override default settings. If you use the Defaults Editor or import a new defaults file,
the default changes do not change the settings for cards that are currently installed or slots that are
pre-provisioned for cards.
Changes made manually to most node-level default settings (either when you initially turn up a node or
change node settings later) override the current settings, whether default or provisioned. If you change
the default settings, using either the Defaults Editor or by importing a new defaults file, the new defaults
take effect immediately for all settings except those relating to protection (SNCP, MS-SPRing,
MS-SPLinear).
change node settings later) override the current settings, whether default or provisioned. If you change
the default settings, using either the Defaults Editor or by importing a new defaults file, the new defaults
take effect immediately for all settings except those relating to protection (SNCP, MS-SPRing,
MS-SPLinear).
Note
Changing the IIOP listener port in the NE defaults requires a reboot of the node in order for the
default change to occur. Use caution when changing this default setting.
default change to occur. Use caution when changing this default setting.
Use the following procedures if you need to edit, import, or export NE defaults.