Руководство По Установке для Cisco Cisco Unified MeetingPlace Audio Server
Cisco MeetingServer 5.1 Installation Planning Guide
37
Cisco Systems
March 2003
Australia
Notes:
•
•
In some cases, the cables provided are not appropriate for the customer’s
PBX or NIU side connections. In this case, customers can create custom
cables. Custom E1 and T1 PRI cables require:
PBX or NIU side connections. In this case, customers can create custom
cables. Custom E1 and T1 PRI cables require:
•
Cat5e STP UTP cable
•
Add the ferrite that came on the Latitude-shipped cable
•
RJ-48c connector on the break out side box
•
In E1 environments, MeetingPlace can be tied directly to the PSTN, and
no CSU is needed.
no CSU is needed.
•
Australia
Latitude does not supply any E1 cables with servers shipped
to Australia.
Figures 3-7 to 3-9 are examples of different configurations and their
resulting system capacities.
resulting system capacities.
Note: E1 Multi Access Blades are installed starting at the left-most card
slot (slot 1, when you are facing the front of the server) and proceed
towards the right, followed by Smart Blades. IP Access Blades are installed
starting at the right most card slot (slot 16) and proceed towards the left.
slot (slot 1, when you are facing the front of the server) and proceed
towards the right, followed by Smart Blades. IP Access Blades are installed
starting at the right most card slot (slot 16) and proceed towards the left.
1
2
3
4
5
6
7-10
11
12
13
14
15
16
MA MA SB SB SB SB
Reserved
Slots
SB SB SB SB SB SB
Figure 3-7 Pure E1 Configuration: 960 PSTN ports, 960 total ports
5
1
2
3
4
5
6
7-10
11
12
13
14
15
16
SB SB SB SB IP IP
Reserved
Slots
IP IP IP IP IP IP
Figure 3-8 Pure IP Configuration: 384 IP ports, 384 total ports
6
1
2
3
4
5
6
7-10
11
12
13
14
15
16
#IP
Ports
Max
PSTN
Ports
Total
Ports
Ports
MA MA SB SB SB SB Reserved
Slots
SB SB SB SB SB IP
48
810
858
5
MA=E1 Multi-Access Blade. Slots 7-10 are reserved for CPU and system controller cards.
6
SB=Smart Blade (no E1 functionality). IP=IP Access Blade. Smart Blades can support up to two IP Access Blades or
96 PSTN Multi-Access Blade ports. IP Access Blades and Multi-Access Blades both require associated Smart
Blades.
Blades.