Руководство По Установке для Cisco Cisco Unified MeetingPlace Audio Server
3-28 Telephony and LAN planning
Cisco MeetingPlace Audio Server Installation Planning Guide
February 27, 2004
The following table describes the cable-specific requirements.
LAN workstation minimum configuration
You must install additional MeetingTime software on Windows-based
desktops for use by MeetingPlace end users, contacts, and attendants.
desktops for use by MeetingPlace end users, contacts, and attendants.
Sensitivity to network traffic
Because MeetingPlace is connected to the LAN network, traffic on the local
LAN segment can affect MeetingPlace operations. In particular, a “broadcast
storm” (one or more systems on a network segment continuously sends
message packets to the local broadcast address) can bring a MeetingPlace
system down for the duration of the storm. Unless the system manager is
certain that broadcast storms will not occur, the MeetingPlace server should
be partially isolated from the rest of the network.
LAN segment can affect MeetingPlace operations. In particular, a “broadcast
storm” (one or more systems on a network segment continuously sends
message packets to the local broadcast address) can bring a MeetingPlace
system down for the duration of the storm. Unless the system manager is
certain that broadcast storms will not occur, the MeetingPlace server should
be partially isolated from the rest of the network.
To isolate the server, you can use an Ethernet router or switch. An Ethernet
switch is usually simpler and less expensive than a router. Many switches
include filtering mechanisms that control broadcasts. For example, the 3COM
LinkSwitch 1000 temporarily shuts down any port that generates an abnormal
number of broadcast messages. A MeetingPlace system connected directly to
a filtering switch is virtually immune to broadcast storms.
switch is usually simpler and less expensive than a router. Many switches
include filtering mechanisms that control broadcasts. For example, the 3COM
LinkSwitch 1000 temporarily shuts down any port that generates an abnormal
number of broadcast messages. A MeetingPlace system connected directly to
a filtering switch is virtually immune to broadcast storms.
Country
LAN requirements
CPU LAN Cable
:
For twisted-pair Ethernet, 100Base-TX. Provide an RJ-45
connector. This cable is customer supplied.
N
OTE
10BaseT works, but is not recommended.
Multi Access Blade LAN Cable
:
For twisted-pair Ethernet, 100Base-TX. Provide
an RJ-45 connector. Cisco
provides a 7.5-meter CAT-5e cable (#3300-0029-02) with
Ferrite snap-on bead on one end. If the cable is changed, the snap-on bead must be
moved.
moved.
N
OTE
Set your switch to auto-negotiate. If your switch does not support
auto-negotiation, set it to 100 BaseT Full Duplex.
CPU LAN Cable
:
For twisted-pair Ethernet, 100Base-TX UTP. Provide an RJ-45
connector. This cable is customer supplied.
N
OTE
10BaseT works, but is not recommended.
Multi Access Blade LAN Cable
:
For twisted-pair Ethernet, 100Base-TX. Provide
an RJ-45 connector. Cisco provides a 7.5-meter CAT-5e cable (#3300-0029-02) with
Ferrite snap-on bead on one end. If the cable is changed, the snap-on bead must be
moved.
Ferrite snap-on bead on one end. If the cable is changed, the snap-on bead must be
moved.
N
OTE
Set your switch to auto-negotiate. If your switch does not support
auto-negotiation, set it to 100 BaseT Full Duplex.
U.S.
Canada
Hong Kong
Japan