Руководство По Обслуживанию для Cisco Cisco Unified MeetingPlace Audio Server

To set up SNMP community information:

Open the MeetingTime Register Book, and click the 

 tab.

Select the 

topic.

You will configure the following attributes (the following steps explain 
how):

Name

The name of the network management community. Standard 
“public” and “private” communities are predefined. They are 
called MeetingPlace-public and MeetingPlace-private. You 
may use these values or replace them with your own.

IP address

The IP address to which traps are sent for trap communities. 
This parameter is ignored for non-trap communities.

Read-write?

When set to Yes, SNMP messages for this community can 
modify stored SNMP data. (Ignored for trap communities.) 
Typically, managers choose read-only in the public 
community; private communities are often used for read-write 
access.

Is it a trap?

SNMP agents can proactively notify the manager through a 
“trap” (for example, “I am restarting”). The SNMP module 
can activate traps when the system restarts, when a network 
link changes state, or when an SNMP message that fails 
authentication is received.

Click to find community

Configure these

attributes