Руководство По Установке для Cisco Prisma II 1310 nm HDTx Transmitters
3-30
Operation Using the ICIM
78-4010846-01 Rev D
SNMP Configuration Capability,
Continued
7.
Press the
SEL
key.
Result: The Adjust menu for the selected IP parameter appears and the first
segment of the address is highlighted.
Note: The example above shows the IP Address parameter Adjust menu.
Note: The example above shows the IP Address parameter Adjust menu.
The Adjust menus for IP Subnet and Gateway IP are similar.
8.
Enter the correct numbers for the first segment of the address.
Notes: One of two methods can be used to enter the numbers, as follows:
•
Notes: One of two methods can be used to enter the numbers, as follows:
•
Press the
or
keys to increase/decrease the number to set value.
•
Press the
SHIFT
key to change to the numeric entry mode. (“Numlock On”
appears on the front panel LCD.) Then enter the exact number using the
number keys on the 12-key numeric keypad.
9.
Press the
ENTR
key to accept your entry and move to the next address
segment to the right. (You can also use the
or
keys to move to the
address segment of your choice.)
Note: If you are using the numeric entry mode, the cursor moves to the next
Note: If you are using the numeric entry mode, the cursor moves to the next
address segment to the right automatically after you enter the last digit of the
current address segment.
10. Repeat steps 8 and 9 until all address segments are entered.
Result: After you enter the last address segment and press the Enter key, the
system returns to the IP Setup menu.