Руководство По Установке для Cisco Headend System Release 2.7
Obtain System Configuration
4013154 Rev C
23
Obtain System Configuration
Complete the following steps to obtain basic system configuration data. You may
need some of this information later during the upgrade.
1 If necessary, open an xterm window on the DNCS.
2 Type more /etc/hosts and then press Enter. A list of IP (Internet Protocol)
need some of this information later during the upgrade.
1 If necessary, open an xterm window on the DNCS.
2 Type more /etc/hosts and then press Enter. A list of IP (Internet Protocol)
addresses and hostnames appears.
3 On a sheet of paper, write down the IP addresses of the hosts that appear in the
/etc/hosts file.
Important! At a minimum, write down the IP addresses for the following hosts:
Important! At a minimum, write down the IP addresses for the following hosts:
appservatm _______________
dncsatm
_______________
dncseth
_______________
dncsted
_______________
4 Type uname -n and then press Enter. The hostname for the DNCS appears.
Important! Call Cisco Services if the hostname contains a period (.). Cisco
Services engineers will help you change it to a valid hostname.
Services engineers will help you change it to a valid hostname.
5 Write down the hostname for the DNCS, as displayed in step 4: __________
6 From an xterm window on the Application Server, type more /etc/hosts and
6 From an xterm window on the Application Server, type more /etc/hosts and
then press Enter. A list of IP addresses and hostnames appears.
7 Write down the IP addresses and hostnames for the following hosts:
dncsatm
_______________
appservatm (if appservatm is not 10.253.0.10)
_______________
8 At the Application Server, type uname -n and then press Enter. The hostname
for the Application Server appears.
9 Write down the hostname for the Application Server, as displayed in step 8:
_______________