Технические ссылки для Cisco Cisco Transport Manager 9.2
11
Cisco Transport Manager Release 9.2 Basic External Authentication
OL-21046-01
Configuring External Authentication Settings
Configuring External Authentication Settings
The following figure shows the External Authentication fields in the Control Panel. Complete the
following steps to configure external authentication settings, which are stored in the CTM database.
following steps to configure external authentication settings, which are stored in the CTM database.
Figure 2
External Authentication Fields
Step 1
In the Domain Explorer window, choose Administration > Control Panel.
Step 2
Click Security Properties.
Step 3
In the External Authentication area, configure the following settings:
•
Use External Authentication—If checked, all authentication options are enabled, and the external
authentication feature is active.
authentication feature is active.
•
Enable SysAdmin—If checked, the SysAdmin user can always log into CTM, even if the Allow
Local Fallback check box is unchecked and the policy server is down.
Local Fallback check box is unchecked and the policy server is down.
•
Allow Local Fallback—If checked, the CTM client users can still log into the CTM server even if
the policy server is unreachable. The SysAdmin user should enable the Allow Local Fallback setting
in case the policy server is unavailable.
the policy server is unreachable. The SysAdmin user should enable the Allow Local Fallback setting
in case the policy server is unavailable.
•
Authentication Server IP—(Applicable only to SiteMinder 4.x) Specify the IP address of the policy
server. IPv6 addresses are not supported.
server. IPv6 addresses are not supported.
•
Authentication Port—(Applicable only to SiteMinder 4.x) Specify the policy server port for
authentication (for example, 44442).
authentication (for example, 44442).