для Cisco Cisco Packet Data Gateway (PDG)
GTPP Interface Configuration
Configuring the GPRS Tunneling Protocol ▀
GTPP Interface Administration and Reference, StarOS Release 19 ▄
51
call-control-profile cc-prof_name
associate accounting-policy policy_name
end
The accounting policy name will be used for finding the thresholds limits for various CDR triggers enabled.
3. Associate the accounting context with the ePDG service.
configure
context context_name
call-control-profile cc-prof_name
accounting context context-name [ gtpp group gtppgroup-name ]
end
This command can also be used to associate a predefined GTPP server group - including all its associated
configuration - with the call-control-profile. If the GTPP group is not specified, then a default GTPP group in
the accounting context will be used.
configuration - with the call-control-profile. If the GTPP group is not specified, then a default GTPP group in
the accounting context will be used.
4. Configure the GTPP group related parameters like GTPP server parameters, GTPP dictionary, and optionally
CGF to support GTPP accounting:
configure
context context_name
gtpp group gtpp_group
gtpp charging-agent address ip_address port port_num
gtpp server server_name udp-port port_num
gtpp dictionary dictionary_num
gtpp storage-server mode { local | remote | streaming }
gtpp attribute node-id-suffix cg
gtpp attribute local-record-sequence-number
gtpp trigger time-limit
end
Configuring GTPP for GGSN/P-GW
This section provides the GTPP configuration for GGSN and P-GW.
1. Configure the GTPP group and accounting context configuration in APN level and also specify the accounting
mode.