Примечания к выпуску для Cisco Cisco Aironet 1240 AG Access Point

Скачать
Страница из 20
 
18
Release Notes for Cisco Aironet Access Points and Bridges for Cisco IOS Release 12.4(10b)JA1
OL-15533-01
  Caveats
CSCsl76740—Access point crashes after SNMP query 
An Access point may crash when an SNMP query is performed over an interface where a QoS policy 
is configured.
Workaround: None. 
CSCsj53216—Supplicant fails to renew DHCP address at Logon when access point changes VLAN 
Supplicant intermittently does not get a DHCP address if the access point changes the VLAN at 
logon. The failure occurs on EAP authentication with the access point in VLAN x and user in 
VLAN y.
Workaround 1: If possible put access point and user on same VLAN. 
Workaround 2: Remove supplicant from the access point (clear dot11 client [mac address]).
Workaround 3: Release/renew IP address on the supplicant manually.
CSCsk70798—Access point does not transmit PPP negotiation causing Microsoft VPN to stop 
working.
Access point stops transmitting Microsoft VPN packets during PPP negotiation. Occurs in Cisco 
IOS release 12.4(3g)JA. Also, when using the built in Microsoft Point-to-Point Tunneling Protocol 
(PPTP) client, it stops working after upgrading from release 12.3(2)JA2 to release 12.4(3G)JA.
Workaround: Use Cisco IOS release 12.3(2)JA2.
CSCsl22021—The Web Services page in the on the access point GUI fails to load 
The Web Services page in the access point GUI fails to load when username and ip http 
authentication is configured.
Workaround: None.
CSCsl53623—Current rate downgrades from 36 Mb to 1-2Mb after operating normally for about 
2-3 hours 
Occurs on 1310 access point/bridge running Cisco IOS release 12.3(8)JEA. 
Workaround: Remove work flow to another link and wait one half hour before restoring.
CSCsj25335—IP redirect feature towards DNS packet 
IP redirect feature is redirecting DNS traffic to the specified host, however, the IP Redirect Features 
and Restrictions 
Technical Reference document on cisco.com states that the data should not be 
directed. Occurs on 1230 series access point running Cisco IOS release 12.3(8)JEB.
Technical reference can be found at the following link:
Workaround: None.