Руководство По Устранению Ошибки для Cisco Cisco ASA for Nexus 1000V Series Switch
ASA SNMP Feature Enhancement Implementation
Document ID: 118051
Contributed by Dinkar Sharma, Cisco TAC Engineer.
Jul 28, 2014
Jul 28, 2014
Contents
Introduction
Prerequisites
Requirements
Components Used
Background Information
Support for 128 SNMP Hosts
Purpose
Single−Context Mode
Multi−Context Mode
Description
Configure
CLI Commands
Example Configuration
Support for cpmCPUTotal5minRev SNMP OIDs
Purpose
CLI Commands
New OIDs
Troubleshoot
Show Commands
Prerequisites
Requirements
Components Used
Background Information
Support for 128 SNMP Hosts
Purpose
Single−Context Mode
Multi−Context Mode
Description
Configure
CLI Commands
Example Configuration
Support for cpmCPUTotal5minRev SNMP OIDs
Purpose
CLI Commands
New OIDs
Troubleshoot
Show Commands
Introduction
This document describes the new Simple Network Management Protocol (SNMP) features that are available
for the Cisco Adaptive Security Appliance (ASA) 5500−X Series Firewall in software Release 9.1.5 and
Releases 9.2.(1) and later.
for the Cisco Adaptive Security Appliance (ASA) 5500−X Series Firewall in software Release 9.1.5 and
Releases 9.2.(1) and later.
Prerequisites
Requirements
There are no specific requirements for this document.
Components Used
The information in this document is based on the Cisco ASA 5500−X Series Firewall that runs Cisco ASA
®
Software Release 9.1.5 and Releases 9.2.(1) and later.
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.