Руководство По Установке для Cisco Cisco Content Security Management Appliance M1070
12
Command-Line Interface
Step 1
For command-line interface access via the serial port
(see the
(see the
access the command-line interface terminal emulator
using 9600 bits, 8 bits, no parity, 1 stop bit (9600, 8,
N, 1) and flow control set to Hardware.
using 9600 bits, 8 bits, no parity, 1 stop bit (9600, 8,
N, 1) and flow control set to Hardware.
Step 2
Initiate a telnet or SSH session to the IP address
192.168.42.42.
192.168.42.42.
Step 3
Log in as admin with the password ironport.
Step 4
At the prompt, run the systemsetup command.