Руководство По Проектированию для Cisco Cisco DX70
Cisco DX Series Wireless LAN Deployment Guide
80
(Cisco Controller) >show 802.11a
(Cisco Controller) >show 802.11b
(Cisco Controller) >show 802.11b
Legacy Tx Beamforming setting....................
Enabled
Auto RF (RRM)
When using the Cisco Unified Wireless LAN Controller it is recommended to enable Auto RF to manage the channel and
transmit power settings.
Configure the access point transmit power level assignment method for either 5 or 2.4 GHz depending on which band is to be
utilized.
If using automatic power level assignment, a maximum and minimum power level can be specified.
transmit power settings.
Configure the access point transmit power level assignment method for either 5 or 2.4 GHz depending on which band is to be
utilized.
If using automatic power level assignment, a maximum and minimum power level can be specified.