Технические ссылки для Cisco Cisco TelePresence MX700
D15335.04
Cisco TelePresence MX700 and MX800 API Reference Guide CE8.2, JUNE 2016.
Copyright © 2016 Cisco Systems, Inc. All rights reserved.
48
Cisco TelePresence MX700 and MX800
API Reference Guide
xConfiguration Audio Input HDMI [n] Mode
This setting applies to HDMI [2..3] for single camera systems, and to HDMI [3] for dual camera
systems.
Define if the audio channels on the HDMI input shall be enabled. The HDMI inputs have two
audio channels.
Requires user role: ADMIN
Default value: On
Default value: On
USAGE:
xConfiguration Audio Input HDMI
n
Mode:
Mode
where
n
: Unique ID that identifies the HDMI input. Range: 2..3 for single camera systems; 3..3 for
dual camera systems
Mode
: Off/On
Off: Disable audio on the HDMI input.
On: Enable audio on the HDMI input.
Off: Disable audio on the HDMI input.
On: Enable audio on the HDMI input.
xConfiguration Audio Input HDMI [n] VideoAssociation MuteOnInactiveVideo
This setting applies to HDMI [2..3] for single camera systems, and to HDMI [3] for dual camera
systems.
Determine whether to play audio only when you present the HDMI input source, or to always
play audio when an audio source is connected to the HDMI input.
Requires user role: ADMIN
Default value: On
Default value: On
USAGE:
xConfiguration Audio Input HDMI
n
VideoAssociation MuteOnInactiveVideo:
MuteOnInactiveVideo
where
n
: Unique ID that identifies the HDMI input. Range: 2..3 for single camera systems; 3..3 for
dual camera systems
MuteOnInactiveVideo
: Off/On
Off: Audio is always played, locally and to far end; you do not have to present the HDMI
input source.
On: Audio is played, locally and to far end, only when you present the HDMI input
On: Audio is played, locally and to far end, only when you present the HDMI input
source.
xConfiguration Audio Input Line [1..4] Equalizer ID
Select the equalizer ID of the audio source that is connected to the line input.
Requires user role: ADMIN
Default value: 1
Default value: 1
USAGE:
xConfiguration Audio Input Line
n
Equalizer ID:
ID
where
n
: Unique ID that identifies the audio line input. Range: 1..4
ID
: Integer (1..8)
Set the equalizer ID.
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xConfiguration