Технические ссылки для Cisco Cisco TelePresence MX700
D15335.04
Cisco TelePresence MX700 and MX800 API Reference Guide CE8.2, JUNE 2016.
Copyright © 2016 Cisco Systems, Inc. All rights reserved.
56
Cisco TelePresence MX700 and MX800
API Reference Guide
xConfiguration Cameras Camera [1..7] Brightness DefaultLevel
Define the brightness level. Requires the Cameras Camera [n] Brightness Mode to be set to
Manual.
Requires user role: ADMIN, USER
Default value: 20
Default value: 20
USAGE:
xConfiguration Cameras Camera
n
Brightness DefaultLevel:
DefaultLevel
where
n
: Unique ID that identifies the camera. Range: 1..7
DefaultLevel
: Integer (1..31)
The brightness level.
xConfiguration Cameras Camera [n..7] Flip
This setting applies to Camera [2..7] for single camera systems, and to HDMI [3..7] for dual
camera systems.
With Flip mode (vertical flip) you can flip the image upside down. Flipping applies both to the
With Flip mode (vertical flip) you can flip the image upside down. Flipping applies both to the
self-view and the video that is transmitted to the far end.
Requires user role: ADMIN, USER
Default value: Auto
Default value: Auto
USAGE:
xConfiguration Cameras Camera
n
Flip:
Flip
where
n
: Unique ID that identifies the camera. Range: 2..7 for single camera systems; 3..7 for dual
camera systems
Flip
: Auto/Off/On
Auto: If the camera detects that it is mounted upside down, the image is automatically
flipped. If the camera cannot auto-detect whether it is mounted upside down or not, the
image is not changed.
Off: Display the image on screen the normal way.
On: Display the image flipped upside down. This setting is used when a camera is
Off: Display the image on screen the normal way.
On: Display the image flipped upside down. This setting is used when a camera is
mounted upside down, but cannot automatically detect which way it is mounted.
xConfiguration Cameras Camera [n..7] Focus Mode
This setting applies to Camera [2..7] for single camera systems, and to HDMI [3..7] for dual
camera systems.
Define the camera focus mode.
Requires user role: ADMIN, USER
Default value: Auto
Default value: Auto
USAGE:
xConfiguration Cameras Camera
n
Focus Mode:
Mode
where
n
: Unique ID that identifies the camera. Range: 2..7 for single camera systems; 3..7 for dual
camera systems
Mode
: Auto/Manual
Auto: The camera will auto focus once a call is connected, as well as after moving the
camera (pan, tilt, zoom). The system will use auto focus only for a few seconds to set
the right focus; then auto focus is turned off to prevent continuous focus adjustments of
the camera.
Manual: Turn the autofocus off and adjust the camera focus manually.
Manual: Turn the autofocus off and adjust the camera focus manually.
xConfiguration Cameras Camera [1..7] Gamma Mode
This setting enables gamma corrections, and applies only to cameras which support gamma
mode. Gamma describes the nonlinear relationship between image pixels and monitor
brightness.
Requires user role: ADMIN, USER
Default value: Auto
Default value: Auto
USAGE:
xConfiguration Cameras Camera
n
Gamma Mode:
Mode
where
n
: Unique ID that identifies the camera. Range: 1..7
Mode
: Auto/Manual
Auto: Auto is the default and the recommended setting.
Manual: In manual mode the gamma value is changed with the gamma level setting, ref.
Cameras Camera [n] Gamma Level.
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xConfiguration