Технические ссылки для Cisco Cisco TelePresence MX700
D15335.04
Cisco TelePresence MX700 and MX800 API Reference Guide CE8.2, JUNE 2016.
Copyright © 2016 Cisco Systems, Inc. All rights reserved.
67
Cisco TelePresence MX700 and MX800
API Reference Guide
xConfiguration Network [1] IEEE8021X Mode
The system can be connected to an IEEE 802.1X LAN network, with a port-based network
access control that is used to provide authenticated network access for Ethernet networks.
Requires user role: ADMIN
Default value: Off
Default value: Off
USAGE:
xConfiguration Network
n
IEEE8021X Mode:
Mode
where
n
: Index that identifies the network. Range: 1..1
Mode
: Off/On
Off: The 802.1X authentication is disabled (default).
On: The 802.1X authentication is enabled.
Off: The 802.1X authentication is disabled (default).
On: The 802.1X authentication is enabled.
xConfiguration Network [1] IEEE8021X TlsVerify
Verification of the server-side certificate of an IEEE802.1x connection against the certificates in
the local CA-list when TLS is used. The CA-list must be uploaded to the video system. This can
be done from the web interface.
This setting takes effect only when Network [1] IEEE8021X Eap Tls is enabled (On).
Requires user role: ADMIN
Default value: Off
Default value: Off
USAGE:
xConfiguration Network
n
IEEE8021X TlsVerify:
TlsVerify
where
n
: Index that identifies the network. Range: 1..1
TlsVerify
: Off/On
Off: When set to Off, TLS connections are allowed without verifying the server-side
X.509 certificate against the local CA-list. This should typically be selected if no CA-list
has been uploaded to the codec.
On: When set to On, the server-side X.509 certificate will be validated against the local
On: When set to On, the server-side X.509 certificate will be validated against the local
CA-list for all TLS connections. Only servers with a valid certificate will be allowed.
xConfiguration Network [1] IEEE8021X UseClientCertificate
Authentication using a private key/certificate pair during an IEEE802.1x connection. The authen-
tication X.509 certificate must be uploaded to the video system. This can be done from the
web interface.
Requires user role: ADMIN
Default value: Off
Default value: Off
USAGE:
xConfiguration Network
n
IEEE8021X UseClientCertificate:
UseClientCertificate
where
n
: Index that identifies the network. Range: 1..1
UseClientCertificate
: Off/On
Off: When set to Off client-side authentication is not used (only server-side).
On: When set to On the client (video system) will perform a mutual authentication TLS
On: When set to On the client (video system) will perform a mutual authentication TLS
handshake with the server.
xConfiguration Network [1] IEEE8021X Identity
Define the user name for 802.1X authentication.
Requires user role: ADMIN
Default value: ""
Default value: ""
USAGE:
xConfiguration Network
n
IEEE8021X Identity: "
Identity
"
where
n
: Index that identifies the network. Range: 1..1
Identity
: String (0, 64)
The user name for 802.1X authentication.
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xConfiguration