Технические ссылки для Cisco Cisco TelePresence MX700
D15335.04
Cisco TelePresence MX700 and MX800 API Reference Guide CE8.2, JUNE 2016.
Copyright © 2016 Cisco Systems, Inc. All rights reserved.
94
Cisco TelePresence MX700 and MX800
API Reference Guide
UserInterface configuration
xConfiguration UserInterface ContactInfo Type
Choose which type of contact information to show in the status field in the upper left corner of
the display and Touch controller.
Requires user role: ADMIN
Default value: Auto
Default value: Auto
USAGE:
xConfiguration UserInterface ContactInfo Type:
Type
where
Type
: Auto/None/IPv4/IPv6/H323Id/H320Number/E164Alias/SipUri/SystemName/
DisplayName
Auto: Show the address which another system should dial to reach this video system.
The address depends on the default call protocol and system registration.
None: Do not show any contact information.
IPv4: Show the system's IPv4 address.
IPv6: Show the system's IPv6 address.
H323Id: Show the system's H.323 ID (refer to the H323 H323Alias ID setting).
H320Number: Show the system's H.320 number as contact information (only applicable
IPv4: Show the system's IPv4 address.
IPv6: Show the system's IPv6 address.
H323Id: Show the system's H.323 ID (refer to the H323 H323Alias ID setting).
H320Number: Show the system's H.320 number as contact information (only applicable
if connected to Cisco TelePresence ISDN Link).
E164Alias: Show the system's H.323 E164 Alias as contact information (refer to the
E164Alias: Show the system's H.323 E164 Alias as contact information (refer to the
H323 H323Alias E164 setting).
SipUri: Show the system's SIP URI (refer to the SIP URI setting).
SystemName: Show the system's name (refer to the SystemUnit Name setting).
DisplayName: Show the system's display name (refer to the SIP DisplayName setting).
SipUri: Show the system's SIP URI (refer to the SIP URI setting).
SystemName: Show the system's name (refer to the SystemUnit Name setting).
DisplayName: Show the system's display name (refer to the SIP DisplayName setting).
xConfiguration UserInterface KeyTones Mode
You can configure the system to make a keyboard click sound effect (key tone) when typing text
or numbers.
Requires user role: ADMIN, USER
Default value: On
Default value: On
USAGE:
xConfiguration UserInterface KeyTones Mode:
Mode
where
Mode
: Off/On
Off: There is no key tone sound effect.
On: The key tone sound effect is turned on.
Off: There is no key tone sound effect.
On: The key tone sound effect is turned on.
xConfiguration UserInterface Language
Select the language to be used in menus and messages on the screen and Touch controller.
Requires user role: ADMIN, USER
Default value: English
Default value: English
USAGE:
xConfiguration UserInterface Language:
Language
where
Language
: English/ChineseSimplified/ChineseTraditional/Catalan/Czech/Danish/Dutch/
Finnish/French/FrenchCanadian/German/Hungarian/Italian/Japanese/Korean/Norwegian/
Polish/PortugueseBrazilian/Russian/Spanish/Swedish/Turkish/Arabic/Hebrew
Select a language from the list.
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xConfiguration