Руководство По Обслуживанию для Cisco Cisco TelePresence MX700

D14850.03 MX Series Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2011-2012 Cisco Systems, Inc. All rights reserved. 

www.cisco.com

33

The Audio settings

Audio PreferredOutputConnector

Select the preferred connector for the audio out. When the handset is in use the audio out goes 

to the handset, and when hanged up the audio out goes to the preferred output connector.
Requires user role: ADMIN
Value space: <None/Internal>

None: The default audio output is the internal speaker.
Internal: The audio out goes to the internal loudspeaker. NOTE: Requires the "Audio 

InternalSpeaker Mode" to be enabled.

Example: Audio PreferredOutputConnector: Internal

Audio InternalSpeaker Mode

Set the internal loudspeaker mode.
Requires user role: ADMIN
Value space: <On/Off>

On: The internal speakers are enabled.
Off: The internal speakers are disabled.

Example: Audio InternalSpeaker Mode: On

Audio Microphones Mute Enabled

Determine whether audio-mute is allowed or not. The default value is True.
Requires user role: ADMIN
Value space: <True/InCallOnly>

True: Muting of audio is always available.
InCallOnly: Muting of audio is only available when the device is in a call. When Idle it is not 

possible to mute the microphone. This is useful when an external telephone service/audio 

system is connected via the codec and is to be available when the codec is not in a call. 

When set to InCallOnly this will prevent the audio-system from being muted by mistake.

Example: Audio Microphones Mute Enabled: True

Audio SoundsAndAlerts KeyTones Mode

Not applicable in this version.

Audio SoundsAndAlerts RingTone

Select the ring tone for incoming calls.
Requires user role: USER
Value space: <Marbles/IceCrystals/Polaris/Alert/Discreet/Fantasy/Jazz/
Nordic/Echo/Rhythmic>

Range: Select a tone from the list of ring tones.

Example: Audio SoundsAndAlerts RingTone: Jazz

Audio SoundsAndAlerts RingVolume

Sets the ring tone volume for an incoming call.
Requires user role: USER
Value space: <0..100>

Range: The value goes in steps of 5 from 0 to 100 (from -34.5 dB to 15 dB). Volume 0 = Off.

Example: Audio SoundsAndAlerts RingVolume: 50

Audio VolumeHandset

Set the volume on the handset.
Requires user role: ADMIN
Value space: <0..100>

Range: The value goes in steps of 5 from 0 to 100 (from -34.5 dB to 15 dB). Value 0 = Off.

Example: Audio VolumeHandset: 70

Audio VolumeHeadset

Set the volume on the headset.
Requires user role: ADMIN
Value space: <0..100>

Range: The value goes in steps of 5 from 0 to 100 (from -34.5 dB to 15 dB). Value 0 = Off.

Example: Audio VolumeHeadset: 70

Audio Volume

Set the volume on the loudspeaker.
Requires user role: USER
Value space: <0..100>

Range: The value goes in steps of 5 from 0 to 100 (from -34.5 dB to 15 dB). Value 0 = Off. 

Example: Audio Volume: 70

Introduction

Table of contents

Web interface

Advanced settings

Appendices

Advanced settings