Руководство По Обслуживанию для Cisco Cisco TelePresence MX700

www.cisco.com

AdministrAtor guide

Network [1..1] IPv6 Gateway

Define the IPv6 network gateway address. Only applicable if the Network IPv6 Assignment is set

to Static.
Requires user role: ADMIN
Value space: <S: 0, 64>

Format: The IPv6 address of host name.

Example: Network 1 IPv6 Gateway: "ffff:ffff:ffff:ffff:ffff:ffff:ffff:ff
ff"

Network [1..1] IPv6 Assignment

Define whether to use Autoconf or Static IPv6 assignment.
Requires user role: ADMIN
Value space: <Static/Autoconf>

Static: Set the network assignment to Static and configure the static IPv6 settings (IP Address

and Gateway).
Autoconf: Enable IPv6 stateless autoconfiguration of the IPv6 network interface. See

RFC4862 for a detailed description.

Example: Network 1 IPv6 Assignment: Autoconf

Network [1..1] IPv6 DHCPOptions

Retrieves a set of DHCP options from a DHCPv6 server.
Requires user role: ADMIN
Value space: <On/Off>

On: Enable the retrieval of a selected set of DHCP options from a DHCPv6 server.
Off: Set to Off when IPv6 Assignment is set to Static.

Example: Network 1 IPv6 Gateway: On

Network [1..1] QoS Mode

The QoS (Quality of Service) is a method which handles the priority of audio, video and data in

the network. The QoS settings must be supported by the infrastructure. Diffserv (Differentiated

Services) is a computer networking architecture that specifies a simple, scalable and coarse-

grained mechanism for classifying, managing network traffic and providing QoS priorities on

modern IP networks.
Requires user role: ADMIN
Value space: <Off/Diffserv>

Off: No QoS method is used.
Diffserv: When you set the QoS Mode to Diffserv you must configure the Diffserv sub menu

settings (Audio, Data, Signalling and Video).

Example: Network 1 QoS Mode: diffserv

Network [1..1] QoS Diffserv Audio

The Diffserv Audio defines which priority Audio packets should have in an IP network. Enter

a priority, which ranges from 0 to 63 for the packets. The higher the number, the higher the

priority. These priorities might be overridden when packets are leaving the network controlled by

the local network administrator. NOTE: Requires the Network QoS Mode to be set to Diffserv.
Requires user role: ADMIN
Value space: <0..63>

Audio: A recommended value is Diffserv Code Point (DSCP) AF41, which equals the value

34. If in doubt, contact your network administrator.
Range: Select a value from 0 to 63.

Example: Network 1 QoS Diffserv Audio: 0

Network [1..1] QoS Diffserv Data

The Diffserv Data defines which priority Data packets should have in an IP network. Enter a

priority, which ranges from 0 to 63 for the packets. The higher the number, the higher the

priority. These priorities might be overridden when packets are leaving the network controlled by

the local network administrator. NOTE: Requires the Network QoS Mode to be set to Diffserv.
Requires user role: ADMIN
Value space: <0..63>

Data: A recommended value is Diffserv Code Point (DSCP) AF23, which equals the value 22.

If in doubt, contact your network administrator.
Range: Select a value from 0 to 63.

Example: Network 1 QoS Diffserv Data: 0

Network [1..1] QoS Diffserv Signalling

The Diffserv Signalling defines which priority Signalling packets should have in an IP network.

Enter a priority, which ranges from 0 to 63 for the packets. The higher the number, the higher the

priority. These priorities might be overridden when packets are leaving the network controlled by

the local network administrator. NOTE: Requires the Network QoS Mode to be set to Diffserv.
Requires user role: ADMIN
Value space: <0..63>

Signalling: A recommended value is Diffserv Code Point (DSCP) AF31, which equals the value

26. If in doubt, contact your network administrator.
Range: Select a value from 0 to 63.

Example: Network 1 QoS Diffserv Signalling: 0

Introduction

Table of contents

Web interface

Advanced settings

Appendices

Advanced settings