Руководство По Обслуживанию для Cisco Cisco TelePresence MX700

D14850.03 MX Series Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2011-2012 Cisco Systems, Inc. All rights reserved. 

www.cisco.com

46

Network [1..1] VLAN Voice Mode

Set the VLAN voice mode.
Requires user role: ADMIN
Value space: <Auto/Manual/Off>

Auto: The Cisco Discovery Protocol (CDP), if available, assigns an id to the voice VLAN. If 

CDP is not available, VLAN is not enabled. The VLAN Voice Mode automatically will be set to 

Auto when the GUI is used to set the Provisioning Mode to CUCM. 
Manual: The VLAN id is set manually using the Network VLAN Voice VlanId setting. If CDP is 

available, the manually set value will be overruled by the value assigned by CDP.
Off: VLAN is not enabled.

Example: Network 1 VLAN Voice Mode: Off

Network [1..1] VLAN Voice VlanId

Set the VLAN voice ID. This setting will only take effect if VLAN Voice Mode is set to Manual.
Requires user role: ADMIN
Value space: <1..4094>

Range: Select a value from 1 to 4094.

Example: Network 1 VLAN Voice VlanId: 1

Introduction

Table of contents

Web interface

Advanced settings

Appendices

Advanced settings