для Cisco Cisco Customer Voice Portal 8.0(1)

To create a configuration that contains only the modifications needed for the comprehensive
exercise, first restore the running configuration to its original, pre-exercise state as follows:

Telnet to the voice gateway and log in as follows:

a.

From the Windows taskbar, select Start > Run.

The Run window displays.

b.

In the Run window, enter: 

 and click Ok.

Where: <Gateway IP> is the IP address of the voice gateway you are using for these exercises.

The User Access Verification window displays.

c.

Enter the password for the gateway.

The hostname prompt for the gateway displays. Example: MyGateway

You must be in enable mode to copy the gateway configuration. At the gateway hostname
prompt, enter 

 and press 

. Then enter the password you established for your gateway

enable mode.

The prompt changes to the gateway hostname followed by a # sign. Example: MyGateway#

To restore the gateway running configuration, if you have changed the gateway startup
configuration, first restore it from a saved configuration file as follows:

a.

Type

 and press 

.

Where: <saved_config> is the name of a file that contains your original, simplified, working
gateway configuration. (No file extension is needed for this command.)

b.

At the display 

 press 

 to confirm

the filename and action.

The system responds with a confirmation message.

To make the running configuration the same as the restored startup configuration, reload the
gateway by entering and confirming the reload command:

a.

Type 

 and press 

.

b.

Respond to the prompt. Type 

 and press 

.

Log into the All-in-One-Box Server and Start the Operations Console

In this task, log into the Operations Console as a pre-step for identifying the gateway to CVP.

Getting Started with Cisco Unified Customer Voice Portal Release 8.0(1)