Руководство По Установке для Cisco Cisco 1900 2900 3900 Series 8-Port Gigabit Ethernet HS-WIC with PoE
4
Cisco 3G Lightning Arrestor (3G-ACC-OUT-LA)
OL-17929-01
Technical Specifications
Note
This lightning arrestor is part of a lightning arrestor kit. The kit contains a lightning arrestor, a grounding
lug, and this instruction sheet.
lug, and this instruction sheet.
Note
When you install the lightning arrestor, follow the regulations or best practices applicable to lightning
protection installation in your local area.
protection installation in your local area.
Suggested Cable
Coaxial cable loses efficiency as the frequency increases, resulting in signal loss. The cable should be
kept as short as possible because cable length also determines the amount of signal loss (the longer the
run, the greater the loss).
kept as short as possible because cable length also determines the amount of signal loss (the longer the
run, the greater the loss).
Cisco recommends a high-quality, low-loss cable for use with the lightning arrestor.
Technical Specifications
Arrestor Type
Quarter wave high pass filter
Main path connectors
Unprotected side: TNC jack (female)
Protected side: TNC plug (male)
Protected side: TNC plug (male)
Impedance
50
Ω
Frequency range
800 MHz to 2200 MHz
Return loss
> 26 dB
Insertion loss
< 0.1 dB
RF CW power
< 20 W
Surge current handling capability
20 single / 10 multiple kA (test pulse 8/20
μs)
Residual pulse energy
.03 microjoules typically
(test pulse 4 kV 1.2/50
(test pulse 4 kV 1.2/50
μs; 2kA 8/20 μs)
Operating temperature range
–40°F to 185°F (–40°C to 85°C)
Waterproof rating
IP67
Mouting and grounding
Bulkhead
Alternate grounding
Supplied ground lug and customer-provided 6 AWG, 20 inches
maximum length ground wire
maximum length ground wire
Material
Housing: brass
Center contact: gold-plated brass
Center contact: gold-plated brass