Руководство По Устранению Ошибки для Cisco Cisco ONS 15600 Multiservice Switching Platform (MSSP)

Introduction
 Prerequisites
      Requirements
      Components Used
      Conventions
 Identify the IP Address
 Related Information

Cisco ONS 15600 nodes do not display their IP addresses on the chassis. This document describes how to
identify the IP address of an ONS 15600.

Readers of this document should have knowledge of these topics:

ONS 15600

• 

The information in this document is based on these software and hardware versions:

ONS 15600

• 

The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.

For more information on document conventions, refer to the Cisco Technical Tips Conventions.

This procedure uses a TL1 connection from the PC terminal to the TL1 port on the ONS 15600 node. Use this
step−by−step procedure:

Use a DB−9 cable (straight through male−to−female) to connect the PC to the DB−9 port on the
customer access panel (CAP) on the back of the ONS 15600.

1. 

Use a TL1 connection to start HyperTerminal on the PC.

2. 

Select the correct COM port in the Connect using field from the dropdown list, as shown in Figure 1.

3.