Технические ссылки для Cisco Cisco ONS 15310-MA SONET Multiservice Platform
16
•
REGENNAME indicates the name of a regeneration group. Applicable only to DWDM flavored
cards, which support regeneration group. REGENNAME is a string. The default value is "NULL".
cards, which support regeneration group. REGENNAME is a string. The default value is "NULL".
•
RETIME indicates the RETIME function for all the facilities on this card. Applies only to the
DS1/E1-56 card. The parameter type is ON_OFF (disable or enable an attribute). (Supported on
the E1-21-DS3-E3-3 and E1-63-DS3-E3-3 card for Cisco ONS 15310-MA SDH platform).
DS1/E1-56 card. The parameter type is ON_OFF (disable or enable an attribute). (Supported on
the E1-21-DS3-E3-3 and E1-63-DS3-E3-3 card for Cisco ONS 15310-MA SDH platform).
•
FRPROLE indicates the fast ring protection enable mode for GE-XP and 10GE-XP cards units
involved in a protection scheme.
involved in a protection scheme.
•
FRPSTATE indicates the fast ring protection enable state.
Cisco ONS 15454 SDH and Cisco ONS 15600 SDH
Input Example:
ENT-EQPT::SLOT-16:48::STM4;
Cisco ONS 15310-MA SDH
Input Example:
ENT-EQPT::SLOT-2:86::E1-21-DS3-E3-3;
INIT-SYS
Use the Initialize System (INIT-SYS) command to initialize the specified card and its associated
subsystem(s).
subsystem(s).
Input Format:
INIT-SYS:[<TID>]:<AID>:<CTAG>::<PH>[,<CMDMDE=CMDMDE>];
•
TID is the name of the node you want to access. If you only want to query the node you connected
to, leave the TID blank.
to, leave the TID blank.
•
AID indicates slot and port.
•
CTAG is any non-blank character series that does not have to be unique.
•
CMDMDE is the card mode.
Cisco ONS 15454 SDH and Cisco ONS 15600 SDH
Input Example:
INIT-SYS:HOTWATER:SLOT-8:201::1,CMDMDE=FRCD;