Руководство По Обслуживанию для Cisco Cisco Unified MeetingPlace SMTP E-Mail Gateway
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
4-6
Cisco MeetingPlace E-Mail Gateway System Manager’s Guide
OL-6001-01
Chapter 4 Managing MeetingPlace E-Mail Gateway
MeetingPlace Gateways Configuration Utility
No entry needs to be made in the shadow server field. The MeetingPlace Gateway Configurations Utility
will automatically enable communication with the shadow server without an entry in the Gateway SIM
tab.
will automatically enable communication with the shadow server without an entry in the Gateway SIM
tab.
To configure a network system without DNS:
Step 1
Open the Services Control Manager (Start | Settings | Control Panel | Services) and stop all MeetingPlace
services.
services.
Step 2
Click Delete Unit if the Shadow Server input field is not editable.
Step 3
Enter the shadow server hostname or IP address in the shadow server field of the Gateway SIM tab.
Step 4
Open the Services Control Manager (Start | Settings | Control Panel | Services) and restart all
MeetingPlace services.
MeetingPlace services.
Note
You do not need to configure the Shadow Server field if you are using DNS and your DNS table
contains a MeetingPlace hostname with two assigned IP addresses (one belonging to the
Network Server and the other belonging to the Shadow Server). However, if you entered an IP
address for the Primary MeetingPlace Server, you will need to enter an IP address for the
Shadow Server as well.
contains a MeetingPlace hostname with two assigned IP addresses (one belonging to the
Network Server and the other belonging to the Shadow Server). However, if you entered an IP
address for the Primary MeetingPlace Server, you will need to enter an IP address for the
Shadow Server as well.