Руководство Администратора для Cisco Cisco HDT Network Storage Hard Drive Trays

About This Guide

Linksys Small Business NSS4000 and NSS6000 Series Network Storage System Administration Guide

2

The

 Linksys Business Series Network Storage System Administrator Guide

 

describes the Administrative features that are available for you to configure and 
optimize your NSS. If you are setting up your system for the first time, refer to the 

Linksys Business Series Network Storage System Getting Started Guide

. 

Installing the NSS system involves a series of steps, from setting up the hardware 
to configuring the device. Certain activities must take place before others may be 
attempted (for example, you must set the User and Group ID ranges must be set 
before you join the NSS to the domain. 

Set up the hardware:

a. Install the disk drive. Skip this step if you have an NSS4100 or NSS6100 as 

they are already equipped with disk drives.

b. Connect the Ethernet link(s).

c. Connect the power.

Configure the NSS:

a. Log into the Configuration Interface.

b. Configure the time setting (options include NTP or manual).

c. Configure RAID(s). You can choose to skip this step if you have an NSS4100 or 

NSS6100 as it is preconfigured with a RAID5 array. 

d. Create the volume(s).

e. If you have multiple NSS units (one of which is a NSS6000 series unit), and you 

want to virtualize your storage, set the export/Import of the virtualized arrays. 

f.

Configure the Network Domain Identification (NT4, Active Directory, NIS, etc.). 

g. Set up the User and Group ID ranges (this enables the import of groups/users 

from Domain Controllers) 

h. Set up the users’ Home Directory Location (this enables you to set up local 

users).