Руководство Пользователя для Cisco Cisco VC020 Box Camera Enclosure for PVC2300 Camera
Accessory Installation Processes
Installing the PVC2300/WVC2300 Cameras in a VC 020 Enclosure
Camera Accessories Installation and Administration Guide
24
2
WARNING
Never touch uninsulated telephone wires or terminals unless the telephone line has
been disconnected at the network interface. Statement 1037
been disconnected at the network interface. Statement 1037
WARNING
Avoid using a telephone (other than a cordless type) during an electrical storm.
There may be a remote risk of electric shock from lightning. Statement 1038
There may be a remote risk of electric shock from lightning. Statement 1038
STEP 1
Feed the cut Ethernet cable and power cord through the brackets.
STEP 2
Feed the Ethernet cable and power cord through the conduits found on the bottom
of the enclosure. The power cord goes through the conduit closest to the power
supply wiring.
of the enclosure. The power cord goes through the conduit closest to the power
supply wiring.
WARNING
When stranded wiring is required, use approved wiring terminations, such as
closed-loop or spade-type with upturned lugs. These terminations should be the
appropriate size for the wires and should clamp both the insulation and conductor.
Statement 1002
closed-loop or spade-type with upturned lugs. These terminations should be the
appropriate size for the wires and should clamp both the insulation and conductor.
Statement 1002
WARNING
Use copper conductors only. Statement 1025