Краткое Руководство По Установке для Cisco Cisco Unified MeetingPlace for Microsoft Office Communicator
Configuring Call Control for Cisco Unified MeetingPlace
How to Configure Call Control for Voice Conferencing
8
Step 8
Configure all other required fields appropriately for your current deployment.
If you configured a Calling Search Space to block unwanted dial-out calls, then apply the Calling Search
Space accordingly to the SIP trunk.
Space accordingly to the SIP trunk.
Tip
For field descriptions, select Help > This Page.
Step 9
Select Save.
Table 3
Fields for Adding a SIP Trunk in Cisco Unified Communications Manager
Field
Action
Device Name
Enter a unique identifier for this trunk, for example:
•
If you are configuring Cisco Unified Communications Manager 5.x, then enter
the name or IP address of the Cisco Unified Communications Manager 6.1 (or
a later release) server that provides front-end signaling for Cisco Unified
MeetingPlace.
the name or IP address of the Cisco Unified Communications Manager 6.1 (or
a later release) server that provides front-end signaling for Cisco Unified
MeetingPlace.
•
If you are configuring Cisco Unified Communications Manager Release 6.1
(or a later release), then enter the name or IP address of the Cisco Unified
Communications Manager 5.x server.
(or a later release), then enter the name or IP address of the Cisco Unified
Communications Manager 5.x server.
Device Pool
If no device pools are defined, select Default.
If device pools are already defined, then either create a new device pool or choose
an existing device pool for a region with a codec that is compatible with the
conferencing gateway (or bridge).
an existing device pool for a region with a codec that is compatible with the
conferencing gateway (or bridge).
Media Resource Group List
(Optional) If Cisco Unified MeetingPlace–supported endpoints are registered to
this Cisco Unified Communications Manager, then we recommend that you
choose one of the following to prevent conference calls from being disrupted by
music whenever a user places a call on hold:
this Cisco Unified Communications Manager, then we recommend that you
choose one of the following to prevent conference calls from being disrupted by
music whenever a user places a call on hold:
•
Default value of <None>.
•
A Media Resource Group List that does not contain music on hold resources.
Note
See
in the
module.
Media Termination Point Required
Uncheck this check box.
Destination Address
Enter the destination IP address, specifically:
•
If you are configuring Cisco Unified Communications Manager 5.x, then enter
the IP address of the Cisco Unified Communications Manager 6.1 (or a later
release) server that provides front-end signaling for Cisco Unified
MeetingPlace.
the IP address of the Cisco Unified Communications Manager 6.1 (or a later
release) server that provides front-end signaling for Cisco Unified
MeetingPlace.
•
If you are configuring Cisco Unified Communications Manager 6.1 or a later
release, then enter the name or IP address of the Cisco Unified
Communications Manager 5.x server.
release, then enter the name or IP address of the Cisco Unified
Communications Manager 5.x server.
Destination Port
Incoming Port
Keep the default value of 5060.