Листовка для Brother HL-3170CDW

English

Español

Português brasileiro

Français

Users can change the Color/Mono settings on the printer driver as follows:

Auto
The machine checks the content of the document for color. If color is detected anywhere 

in the document, it will print the whole of the document using all the colors. In other words, 

it will mix some of the toners to help achieve every shade detected in the document, 

increasing the density of toner applied to the page. If no color content is detected, it will 

print the document in monochrome.
The default setting on your machine is 

Auto.

The machine’s color sensor is very sensitive and may perceive faded black text or an off-

white background as color. If you know that your document is black and white and you want 

to conserve color toner, select 

Mono mode.

Color
Whether the document contains color or just monochrome, your machine will print the 

document using all the colors.
Mono
Select this mode if the document has only black and grayscale text and/or objects. If your 

document contains color, this mode prints the document in 256 levels of gray using the 

black toner.

If either the Cyan, Magenta or Yellow toner reaches the end of its life while printing a color 

document, the print job cannot be completed. You can cancel your print job and choose to 

start the print job again in 

Mono mode, as long as Black toner is available.

For more information about the settings in the printer driver, see User’s Guide: Driver and 

Software (For HL-XXXX) or Software User’s Guide (For DCP-XXXX/MFC-XXXX).