Руководство По Установке для Cisco Cisco Prisma II EDR Receiver
Chapter 2 Module Installation
70
Master/Slave Illustration
Redundancy Interface Panel
The Prisma II Redundancy Interface Panel is an accessory to the Prisma II platform.
It is intended to be used with the master/slave feature and the contact closure alarm
feature of the Prisma II platform.
It is intended to be used with the master/slave feature and the contact closure alarm
feature of the Prisma II platform.
The Prisma II Redundancy Interface Panel serves as an extension to the two DB-37
connectors labeled ALARM IN and ALARM OUT on the connector interface panel
of the chassis. The terminals on the redundancy interface panel are extensions of
pins on the ALARMS OUT and ALARMS IN connectors on the chassis.
connectors labeled ALARM IN and ALARM OUT on the connector interface panel
of the chassis. The terminals on the redundancy interface panel are extensions of
pins on the ALARMS OUT and ALARMS IN connectors on the chassis.
For additional information, see the Prisma II Chassis Installation and Operation Guide,
part number 713375.
part number 713375.