Краткое Руководство По Установке для Cisco Cisco StadiumVision Mobile Reporter
Configuring Serial Commands for External Volume
Support
Support
User Roles
Administrator
When using the external volume strategy, you must configure RS-232 commands to
send to the TV to change the volume.
NOTE: Volume commands do not need to be configured when
internal volume strategy is used.
Cisco StadiumVision Director allows you to configure two types of volume controls:
l
Relative—Depends on the volume increments set in the TV, which vary from
model to model.
l
Absolute—Preferred method. Defines a number of increments that are used to
control the volume between the minimum and maximum volume levels.
o
For the Cisco DMP 4310G—This is configured in the VolumeCount command.
The default is 10.
In addition to the VolumeCount command, you need to configure a string for
each incremental Volumen command.
o
For the SV-4K—Absolute volume is configured only by the series of Volumen
commands only.
provides information about the serial commands used to configure the Relative
and Absolute types of external volume control.
© Cisco Systems, Inc. All rights reserved.
45 of 331