Примечания к выпуску для Cisco Headend System Release 2.7
Chapter 3 System Release 2.7/3.7/4.2 SP2 Installation Procedures
78
4019475 Rev D
8 Using a text editor, append the following line to the .profile file:
export LOCAL_EAS_IP=[Ethernet address of the DNCS]
Note: Substitute the Ethernet address of the DNCS for [Ethernet address of the
DNCS], displayed in step 4.
Example: LOCAL_EAS_IP=192.168.2.1
Note: Substitute the Ethernet address of the DNCS for [Ethernet address of the
DNCS], displayed in step 4.
Example: LOCAL_EAS_IP=192.168.2.1
9 Go to Enable Optional and Licensed Features (on page 79).
10 Type ifconfig -a and then press Enter. Examine the output and find the IP
10 Type ifconfig -a and then press Enter. Examine the output and find the IP
address of the DNCS that is on the same network as the eac.
Note: In this example, the IP address of the eac (from step 6) is 192.168.4.5; the IP
address of the DNCS that is on the same network as the eac is 192.168.4.1.
Example:
hme0: flags=1000843< UP,BROADCAST,RUNNING,MULTICAST,IPv4 > mtu
1500 index 2
Note: In this example, the IP address of the eac (from step 6) is 192.168.4.5; the IP
address of the DNCS that is on the same network as the eac is 192.168.4.1.
Example:
hme0: flags=1000843< UP,BROADCAST,RUNNING,MULTICAST,IPv4 > mtu
1500 index 2
inet 192.168.2.1 netmask ffffff00 broadcast 192.168.2.255
ci0: flags=1000842< BROADCAST,RUNNING,MULTICAST,IPv4 > mtu 9180
index 5
index 5
inet 192.168.4.1 netmask ffffff00 broadcast 192.168.40.255
11 Using a text editor, append the following line to the
/export/home/dncs/.profile file
export LOCAL_EAS_IP=[Ethernet address of the DNCS]
Note: Substitute the Ethernet address of the DNCS for [Ethernet address of the
DNCS], displayed in step 10.
Example: LOCAL_EAS_IP=192.168.4.1
export LOCAL_EAS_IP=[Ethernet address of the DNCS]
Note: Substitute the Ethernet address of the DNCS for [Ethernet address of the
DNCS], displayed in step 10.
Example: LOCAL_EAS_IP=192.168.4.1
12 Go to Enable Optional and Licensed Features (on page 79).