Руководство По Установке для Cisco Headend System Release 2.7
About This Guide
4023737 Rev C
vii
About This Guide
Introduction
This guide provides step-by-step instructions for upgrading our Digital Broadband
Delivery System (DBDS) to System Release (SR) 2.7/3.7/4.2 Service Pack 3 (SP3).
Sites that use this guide to upgrade must currently support SR 4.2.
Delivery System (DBDS) to System Release (SR) 2.7/3.7/4.2 Service Pack 3 (SP3).
Sites that use this guide to upgrade must currently support SR 4.2.
Upgrade software installed through this guide is provided in the form of CDs. This
is not a UniPack upgrade guide.
is not a UniPack upgrade guide.
Scope
These release notes and installation instructions pertain to sites that support either
the SA Resident Application (SARA) or another resident application.
the SA Resident Application (SARA) or another resident application.
Audience
These release notes and installation instructions are written for system operators of
our DBDS, as well as for engineers who install the SR 2.7/3.7/4.2 SP3 software onto
the Digital Network Control System (DNCS) and the SA Application Server.
our DBDS, as well as for engineers who install the SR 2.7/3.7/4.2 SP3 software onto
the Digital Network Control System (DNCS) and the SA Application Server.
Document Version
This is the second formal release of this document. In addition to minor text and
graphic changes, the following table provides the technical changes to this
document.
graphic changes, the following table provides the technical changes to this
document.
Description
See Topic
Corrected the directory called out in Step 4.
Verify the Integrity of the CDs (on page 20)
Corrected the directory called out in Step 2
and the output captured in the example for
Step 3.
and the output captured in the example for
Step 3.
Verify the Integrity of the Maintenance CD
(on page 22)
(on page 22)
Corrected the Savecore directory contents
captured in the example for Step 2.
captured in the example for Step 2.
Verify that the Dump Device is Correctly
Configured (on page 28)
Configured (on page 28)
Added a step to verify the package
information for the SAIpatch.
information for the SAIpatch.
Verify SAItools Version (on page 29)
Added three notes for DBDS networks with
disaster recovery enabled in several places.
disaster recovery enabled in several places.
Changed the command that reboots the TED. Reboot the TED (on page 56)