Руководство По Установке для Cisco Headend Digital Broadband Delivery System
About This Guide
vi
78-745262-01Rev C
System Release Compatibility
DBDS Alarm Manager version 1.0, consisting of Alarm Manager Client 1.0.1.3,
Alarm Manager Server 1.0.1.3, and Alarm Manager NMI 1.0.0.8, was tested and
released for System Release (SR) 2.2 and SR 3.2 Service Pack 2. This product can be
applied to a DBDS system running with Digital Network Control System (DNCS)
application version 3.0.1.16p2.
For a complete configuration listing of DBDS Alarm Manager 1.0 or SR 2.2 and
For a complete configuration listing of DBDS Alarm Manager 1.0 or SR 2.2 and
SR 3.2 Service Pack 2 software compatibility, please contact Cisco Services.
Prerequisites
Take note of the following prerequisites before you install the Alarm Manager
software:
Your DBDS must currently be operating with SR 2.2 or SR 3.2 Service Pack 2 or
later, before installing the Alarm Manager software.
If you are upgrading a site that already supports Alarm Manager software, be
sure that you have a current backup of the Alarm Manager files and database.
Refer to the Backup and Restore EMS Database and Files section of the Alarm
Manager online Help for backup procedures.
Estimated Time to Complete These Procedures
If you are upgrading a site that already supports Alarm Manager software, you can
usually back up the Alarm Manager files and database in 10 minutes, or less.
You can usually install and configure all of the Alarm Manager components in 1
You can usually install and configure all of the Alarm Manager components in 1
hour, or less.