Руководство По Установке для Cisco Cisco Aironet 1200 Access Point
38
78-16238-04
A mounting hardware kit is provided that contains the hardware and fasteners
necessary to mount the access point. Refer to the following table to identify
the materials you need to mount your access point, then go to the section
containing the specific mounting procedure.
necessary to mount the access point. Refer to the following table to identify
the materials you need to mount your access point, then go to the section
containing the specific mounting procedure.
Mounting Method
Materials Required
In Kit
Horizontal or vertical
surface
surface
Four #8 x 1 in. (25.4 mm) screws
Four wall anchors
3/16 in. (4.7 mm) or 3/32 in.
(2.3 mm) drill bit
Drill
Standard screwdriver
Four wall anchors
3/16 in. (4.7 mm) or 3/32 in.
(2.3 mm) drill bit
Drill
Standard screwdriver
Yes
Yes
No
Yes
No
No
No
No
Suspended ceiling
Two rail clips with studs
Two plastic spacers
Two 1/4–20 nuts with built-in
washers
Standard screwdriver
Appropriate wrench or pliers
Two plastic spacers
Two 1/4–20 nuts with built-in
washers
Standard screwdriver
Appropriate wrench or pliers
Yes
Yes
Yes
Yes
Yes
No
No
No