для Cisco Cisco Tunnel Terminating Gateway (TTG)
Global Configuration Mode Commands (A-K)
▀ boot interface
▄ Command Line Interface Reference, StarOS Release 18
5304
medium
{
auto
|
speed
medium_speed
duplex
medium_duplex
}
Default: auto
auto
: configures the interface to auto-negotiate the interface speed. and duplex.
speed
medium_speed
duplex
medium_duplex
: specifies the speed to use at all times where
medium_speed
must be one of:
10
100
1000
The keyword
duplex
is used to set the communication mode of the interface where
medium_duplex
must
be one of:
full
half
media
medium_media
Default: rj45
Optionally sets the physical interface where
Optionally sets the physical interface where
medium_media
must be either rj45 or sfp.
Usage
Modify the boot interface settings to ensure the system is able to obtain a software image from an external
network server.
network server.
Important:
The settings for this command are stored immediately in the boot.sys file. No changes are made to
the system configuration file.
Example
The following configures the primary interface to auto-negotiate the speed.
boot interface spio-eth1 medium auto
boot interface local-eth1 medium auto
The following command configures the secondary interface to a fixed gigabit speed at full duplex using RJ45
connectors for the physical interface.
connectors for the physical interface.
boot interface spio-eth2 medium speed 1000 duplex full media rj45
boot interface local-eth2 medium speed 1000 duplex full media rj45
The following restores the defaults for the boot interface.
no boot interface