Руководство По Обслуживанию для Cisco Cisco Packet Data Gateway (PDG)
Diameter Attribute Definitions
Attributes ▀
Cisco ASR 5000 Series AAA Interface Administration and Reference ▄
OL-23000-01
AVP Flag
M
Charging-Rule-Report
This AVP is used to report the status of a Policy and Charging Control (PCC) rule for installation successful/removal. It is
a reference for a specific PCC rule at the AGW that has been successfully installed, modified or removed because of
trigger from the MS. The PCC-Rule-Status AVP indicates the action being performed on the PCC rule. Multiple instances
of Charging-Rule-Report AVPs shall be used in the case it is required to report different PCCRule-Status values for
different groups of rules within the same Diameter command.
a reference for a specific PCC rule at the AGW that has been successfully installed, modified or removed because of
trigger from the MS. The PCC-Rule-Status AVP indicates the action being performed on the PCC rule. Multiple instances
of Charging-Rule-Report AVPs shall be used in the case it is required to report different PCCRule-Status values for
different groups of rules within the same Diameter command.
AVP Header
1018 5535
Vendor ID
5535
VSA Type
1018
AVP Type
Grouped
Group Value
[CHARGING_RULE_NAME]
[CHARGING_RULE_BASE_NAME]
[PCC_RULE_STATUS]
[RULE_FAILURE_CODE]
[FINAL_UNIT_INDICATION]
AVP Flag
M
Check-Balance-Result
Result of the balance check. Applicable only when requested-Action AVP indicates CHECK_BALANCE.
AVP Header
422 0
Vendor ID
0
VSA Type
422
AVP Type
ENUM. Supported values are:
ENOUGH_CREDIT (0)
NO_CREDIT (1)
Group Value
N/A