Руководство По Обслуживанию для Cisco Cisco Packet Data Gateway (PDG)
RADIUS Attribute Definitions
▀ Attributes
▄ Cisco ASR 5000 Series AAA Interface Administration and Reference
OL-23000-01
4
Value
Unsigned integer
Update-Reason
The Update-Reason Sub-Type should be present in the on-line RADIUS Access-Request message (PPC to
PPS direction). It indicates the reason for initiating the on-line quota update operation. Update reasons 4, 5,
6, 7 and 8 indicate that the associated resources are released at the client side, and therefore the PPS should
not allocate a new quota in the RADIUS Access-Accept message.
PPS direction). It indicates the reason for initiating the on-line quota update operation. Update reasons 4, 5,
6, 7 and 8 indicate that the associated resources are released at the client side, and therefore the PPS should
not allocate a new quota in the RADIUS Access-Accept message.
Type
8
Length
2
Value
Enumerated integer. Supported values are:
Pre-Initialization = 1
Initial-Request = 2
Threshold-Reached = 3
Quota-Reached = 4
Remote-Forced-Disconnect = 5
Client-Service-Termination = 6
Main-SI-Released = 7
Service-Instance-Not-Established = 8
Tariff-Switch-Update = 9
Incorrect-Quota-Type-Received = 10
Poorly-Formed-Quota-Attribute = 11
Initial-Request = 2
Threshold-Reached = 3
Quota-Reached = 4
Remote-Forced-Disconnect = 5
Client-Service-Termination = 6
Main-SI-Released = 7
Service-Instance-Not-Established = 8
Tariff-Switch-Update = 9
Incorrect-Quota-Type-Received = 10
Poorly-Formed-Quota-Attribute = 11
Pre-Paid-Server
The optional, multi-value Pre-Paid-Server indicates the address of the serving PrePaid System. If present,
the Home RADIUS server uses this address to route the message to the serving PrePaid Server. The attribute
may be sent by the Home RADIUS server. If present in the incoming RADIUS Access-Accept message, the
PDSN should send this attribute back without modifying it in the subsequent RADIUS Access-Request
message, except for the first one. If multiple values are present, the PDSN should not change the order of the
attributes.
the Home RADIUS server uses this address to route the message to the serving PrePaid Server. The attribute
may be sent by the Home RADIUS server. If present in the incoming RADIUS Access-Accept message, the
PDSN should send this attribute back without modifying it in the subsequent RADIUS Access-Request
message, except for the first one. If multiple values are present, the PDSN should not change the order of the
attributes.
Type
9
Length
4
Value
IPv4 address