для Cisco Cisco TelePresence Video Communication Server Expressway
Using FindMe for enhanced deployments
You can optionally extend the deployment described in this guide by configuring your video network
deployment to use FindMe. This provides richer presence and a more integrated environment. It uses the
example deployment depicted below:
deployment to use FindMe. This provides richer presence and a more integrated environment. It uses the
example deployment depicted below:
Deployment information
This deployment configuration consists of:
n
FindMe accounts (also known as FindMe users) on the “Lync gateway” VCS that use the Lync network's
domain (ciscotp.com in this example). The B2BUA registers these FindMe accounts into Lync so that Lync
sees them as though they were Lync client registrations, for example:
domain (ciscotp.com in this example). The B2BUA registers these FindMe accounts into Lync so that Lync
sees them as though they were Lync client registrations, for example:
l
David with a URI david.jones@ciscotp.com, containing devices david.jones.office@vc.ciscotp.com
and david.jones.external@vc.ciscotp.com
and david.jones.external@vc.ciscotp.com
l
Alice with a URI alice.parkes@ciscotp.com, containing devices alice.parkes.office@vc.ciscotp.com
and alice.parkes.external@vc.ciscotp.com
and alice.parkes.external@vc.ciscotp.com
These FindMe accounts specify single or multiple endpoints as primary devices to call; the primary
devices can be located anywhere in the video network or anywhere accessible via the video network.
devices can be located anywhere in the video network or anywhere accessible via the video network.
Cisco TelePresence Microsoft Lync and Cisco VCS Deployment Guide (X8.5)
Page 46 of 83
Using FindMe for enhanced deployments