Руководство По Установке для Cisco Cisco Catalyst 6500 Series 7600 Series ASA Services Module
Americas Headquarters:
© 2011 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Migrating to the Cisco ASA Services Module
from the FWSM
from the FWSM
Contents
•
•
•
•
•
•
Information About the Migration
This guide describes how to convert Cisco FWSM configurations to Cisco ASA SM 8.5 configurations.
This document also provides details about the differences between Cisco FWSM and Cisco ASA SM
behavior.
behavior.
Although the ASA SM shares a common software foundation with the FWSM, you cannot directly use
a FWSM configuration on an ASA SM.
a FWSM configuration on an ASA SM.
Differences between the platforms, such as the use of specific commands, prevent FWSM configurations
from being used unmodified on the ASA SM.
from being used unmodified on the ASA SM.
Warning
After running Migration Tool, you cannot paste the migrated configuration directly at the CLI prompt
on the ASA SM; you must copy the configuration over the network to the startup configuration and
reload the ASA SM so that it can perform additional migrations at startup.
on the ASA SM; you must copy the configuration over the network to the startup configuration and
reload the ASA SM so that it can perform additional migrations at startup.
In particular, the NAT feature on the ASA SM is redesigned for increased flexibility and functionality
compared to FWSM. On the ASA SM, you can configure NAT using auto NAT, where you configure
NAT as part of the attributes of a network object, and manual NAT, where you can configure more
advanced NAT options.
compared to FWSM. On the ASA SM, you can configure NAT using auto NAT, where you configure
NAT as part of the attributes of a network object, and manual NAT, where you can configure more
advanced NAT options.