Техническая Спецификация для Cisco Cisco DWDM Transceiver Modules

 

 

© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. 

Page 2 of 4 

Figure 2.    Cisco CFP-100G-SR10 Module 

 

Cisco CFP-100G-ER4 

The Cisco 100GBASE-ER4 (Figure 3) CFP module can support link lengths up to 40 kilometers on standard duplex 

single-mode fiber (SMF, G.652) terminated with SC/PC optical connectors. 100 Gigabit Ethernet signal is carried 

over four wavelengths. Multiplexing and demultiplexing of the four wavelengths are managed within the device. 

The Cisco 100GBASE-ER4 CFP module meets the IEEE 802.3ba requirements for 100GBASE-ER4 performance 

and also supports Digital Optical Monitoring (DOM) of the transmit-and-receive optical signal levels. 

Figure 3.    Cisco CFP-100G-ER4 

 

Technical Specifications 

Cisco CFP modules are supported on Cisco switches and routers. For more details, refer to the document 

. 

Connectors: Dual SC/PC Connector (LR4 and ER4), 24-fiber MPO/MTP Connector (SR10). 

Note:   Only connections with patch cords with physical contact (PC) or ultra physical contact (UPC) connectors 
are supported. Patch cords with APC connectors are not supported. All cables and cable assemblies used must be 

compliant with the standards specified in the standards section.