Руководство По Устранению Ошибки для Cisco Cisco Administrative Workstation
Configuring Distributor AWs with the Same Admin
Site Name
Site Name
Document ID: 29700
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
Architecture
Configure the Admin Site Name
Primary Distributor AW
Secondary Distributor AW
Related Information
Prerequisites
Requirements
Components Used
Conventions
Architecture
Configure the Admin Site Name
Primary Distributor AW
Secondary Distributor AW
Related Information
Introduction
This document describes how to configure two Distributor Admin Workstations (AWs) with the same Admin
Site Name. One Distributor AW serves as the primary Distributor AW, and the other serves as the secondary
Distributor AW. Two Distributor AWs with the same Admin Site Name cannot both be the primary.
Site Name. One Distributor AW serves as the primary Distributor AW, and the other serves as the secondary
Distributor AW. Two Distributor AWs with the same Admin Site Name cannot both be the primary.
Prerequisites
Requirements
Cisco recommends that you have knowledge of these topics:
Cisco Intelligent Contact Management (ICM)
•
How to configure the ICM Distributor AW
•
Components Used
The information in this document is based on these software and hardware versions:
Microsoft Windows NT 4 and Windows 2000
•
Cisco ICM 4.6.2 and later
•
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
Conventions
Refer to Cisco Technical Tips Conventions for more information on document conventions.