Технические ссылки для Cisco Cisco TelePresence MX700
D15335.03
Cisco TelePresence MX700 and MX800 API Reference Guide CE8.1, APRIL 2016.
Copyright © 2016 Cisco Systems, Inc. All rights reserved.
108
Cisco TelePresence MX700 and MX800
API Reference Guide
xCommand Camera PositionSet
Set the camera position.
Requires user role: ADMIN, USER
USAGE:
xCommand Camera PositionSet CameraId:
CameraId
[Focus:
Focus
] [Pan:
Pan
] [Tilt:
Tilt
] [Zoom:
Zoom
]
where
CameraId: Integer (1..7)
The ID of the camera preset you want to reset.
Focus: Integer (0..65535)
Focus the camera near or far.
Pan: Integer (-10000..10000)
Move the camera to the left or right.
Tilt: Integer (-2500..2500)
Move the camera up or down.
Zoom: Integer (0..8500)
Zoom in or out.
xCommand Camera Preset Activate
Activate one of the stored camera presets.
Note that the xCommand Camera Preset commands applies to an individual camera. This is
Note that the xCommand Camera Preset commands applies to an individual camera. This is
in contrast to the xCommand Preset commands where a single preset covers ALL connected
cameras plus the Video Input switcher settings.
Requires user role: ADMIN, USER
USAGE:
xCommand Camera Preset Activate PresetId:
PresetId
where
PresetId: Integer (1..35)
The ID of the camera preset you want to activate.
xCommand Camera Preset ActivateDefaultPosition
Sets the cameras to their default position, if one is defined. The default position is defined
by xCommand Camera Preset Store or by xCommand Camera Preset Edit. Only one default
position can be defined per camera.
Requires user role: ADMIN, USER
USAGE:
xCommand Camera Preset ActivateDefaultPosition [CameraId:
CameraId
]
where
CameraId: Integer (1..7)
The ID of the camera preset you want to activate. If CameraId is not specified, all
cameras will be set in their respective default position, if one is defined.
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xCommand