Технические ссылки для Cisco Cisco TelePresence MX700

D15335.03

 Cisco TelePresence MX700 and MX800 API Reference Guide CE8.1, APRIL 2016. 

Copyright © 2016 Cisco Systems, Inc. All rights reserved. 

88

Cisco TelePresence MX700 and MX800

API Reference Guide

xConfiguration UserInterface OSD Output

Define on which monitor the on-screen information and indicators (OSD) should be displayed.

Requires user role: ADMIN
Default value: 1

USAGE:

xConfiguration UserInterface OSD Output: 

where

: Auto/1/2/3

Auto: The system sends the on-screen information and indicators to the system's 

integrated display. If the system has two integrated displays, the left display is used.

Range 1-3: The system sends the on-screen information and indicators to the speci-

fied output. Choose n to send the on-screen information and indicators to the system's 

Output Connector n.

Video configuration

xConfiguration Video DefaultMainSource

Define which video input source shall be used as the main video source.

Requires user role: ADMIN, USER
Default value: 1

USAGE:

xConfiguration Video DefaultMainSource: 

where

: 1/2/3/4

Set the source to be used as the main video source.

xConfiguration Video Input Connector [1..5] CameraControl Mode

Define whether the camera that is connected to this video input connector can be controlled or 

not.
Note that camera control is not available for Connector 5 (S-video/Composite).

Requires user role: ADMIN
Default value: Connector 1, 2, 3: On   Connector 4, 5: Off

USAGE:

xConfiguration Video Input Connector 

 CameraControl Mode: 

where

: Unique ID that identifies the video input connector. Range: 1..5

: Connector 1, 2, 3, 4: Off/On   Connector 5: Off
Off: Disable camera control.

On: Enable camera control.

Introduction

About the API

xConfiguration

Appendices

xCommand

xStatus



xConfiguration