Технические ссылки для Cisco Cisco TelePresence MX700

D15335.03

 Cisco TelePresence MX700 and MX800 API Reference Guide CE8.1, APRIL 2016. 

Copyright © 2016 Cisco Systems, Inc. All rights reserved. 

94

Cisco TelePresence MX700 and MX800

API Reference Guide

xConfiguration Video Selfview Default OnMonitorRole

Define which monitor/output to display the main video source (self-view) on after a call. The 

value reflects the monitor roles set for the different outputs in the Video Output Connector [n] 

MonitorRole setting.

The setting applies both when self-view is displayed in full screen, and when it is displayed as 

picture-in-picture (PiP), but only if the Video Monitors setting is set to Dual or Triple.

Requires user role: ADMIN
Default value: Current

USAGE:

xConfiguration Video Selfview Default OnMonitorRole: 

where

: First/Second/Third/Current

First: The self-view picture will be shown on outputs with the Video Output Connector 

[n] MonitorRole set to First.

Second: The self-view picture will be shown on outputs with the Video Output 

Connector [n] MonitorRole set to Second.

Third: The self-view picture will be shown on outputs with the Video Output Connector 

[n] MonitorRole set to Third.

Current: When leaving a call, the self-view picture will be kept on the same output as it 

was during the call.

xConfiguration Video Selfview Default PIPPosition

Define the position on screen of the small self-view picture-in-picture (PiP) after a call. The 

setting only takes effect when self-view is switched on (see the Video Selfview Default Mode 

setting) and fullscreen view is switched off (see the Video Selfview Default FullscreenMode 

setting).

Requires user role: ADMIN
Default value: Current

USAGE:

xConfiguration Video Selfview Default PIPPosition: 

where

: Current/UpperLeft/UpperCenter/UpperRight/CenterLeft/CenterRight/

LowerLeft/LowerRight

Current: The position of the self-view PiP will be kept unchanged when leaving a call.

UpperLeft: The self-view PiP will appear in the upper left corner of the screen.

UpperCenter: The self-view PiP will appear in the upper center position.

UpperRight: The self-view PiP will appear in the upper right corner of the screen.

CenterLeft: The self-view PiP will appear in the center left position.

CentreRight: The self-view PiP will appear in the center right position.

LowerLeft: The self-view PiP will appear in the lower left corner of the screen.

LowerRight: The self-view PiP will appear in the lower right corner of the screen.

Introduction

About the API

xConfiguration

Appendices

xCommand

xStatus



xConfiguration