Руководство По Установке для Cisco Cisco TelePresence MX700

D14639.04 Video Systems Getting Started Guide (TC4.2) | 2011 JULY | © 2011 Cisco Systems, Inc. All rights reserved. 

www.cisco.com

30

Setting the system/codec password

You need a username and password to sign in to the web 

and command line interfaces of your system. 

The video conference system is delivered with a default 

user account with username 

admin

 and no password set. 

This user has full access rights to the system.

NOTE:

We strongly recommend that you set a password for 

the 

admin

 user to restrict access to system configuration.

Make sure to keep a copy of the password in a safe place

. 

You have to contact your Cisco representative if you have 

forgotten the password.

1. Go to the 

tab and select

.

2. Enter the 

, the 

, and 

repeat the new password in the appropriate input fields. 
The password format is a string with 0–64 characters.
If a password is not currently set, use a blank 

.

3. Click 

.

Setting the Administrator Settings menu
password

When starting up the system for the first time the 

Administrator Settings menu password is not set. 

NOTE:

We strongly recommend that you define a password 

to protect the Administrator Settings menu, since these 

settings affect the behavior of the video conference system.

The Administrator Settings menu password cannot be 

set via the web interface. This has to be done using the 

command line interface or the remote control and on‑

screen menu.

Set the Administrator Settings menu password from
a command line interface

1. Connect to the system through the network or the 

serial data port, using a command line interface (SSH or 

Telnet).

2. Type the following command:

xCommand SystemUnit MenuPassword Set 

Password: <password>

The password format is a string with 0–255 characters.

Set the Administrator Settings menu password
using the remote control and on-screen menu

1. Go to 

.

On the remote control, press the # key to toggle 

between lower or upper case characters and numbers: 

abc/ABC/123.

2. Enter the menu password. The password you enter is 

hidden; each character is replaced with a star (*).

3. Select Save to save the changes, or Cancel to leave 

without saving.

4. Press 

(   )

to exit.

User interfaces

Introduction

Configuration

Table of contents

Appendices

Configuration