Руководство По Установке для Cisco Cisco TelePresence MX700

Safety instructions

Cisco TelePresence MX Series

For your protection please read these safety instructions

completely before you connect the equipment to the power

source. Carefully observe all warnings, precautions and

instructions both on the apparatus and in these operating

instructions. Retain this manual for future reference.

User Environment
This product is for use in an indoor office environment.

Protection against dust and moisture according to IP 20. Do

not use this product at altitudes above 3000m asl. Do not use

the product in ambient temperatures above 35°C (95°F) and

below 0°C (32°F). Relative humidity (RH) must be between

10% to 90%.

Water and Moisture
Do not operate the apparatus under or near water – for

example near a bathtub, kitchen sink, or laundry tub, in a wet

basement, near a swimming pool or in other areas with high

humidity.

• Never install jacks for communication cables in wet

locations unless the jack is specifically designed for wet

locations.

• Do not touch the product with wet hands.

Cleaning
Unplug the apparatus from communication lines, mains power-

outlet or any power source before cleaning or polishing. Do not

use liquid cleaners or aerosol cleaners. Use a lint-free cloth

lightly moistened with water for cleaning the exterior of the

apparatus.

Ventilation
Do not block any of the ventilation openings of the apparatus.

Never cover the slots and openings with a cloth or other

material. Never install the apparatus near heat sources such as

radiators, heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.

Small objects (like paper clips and staples) entering the

ventilation openings may damage the product.
Do not place the product in direct sunlight or close to a surface

directly heated by the sun.

Lightning
Never use this apparatus, or connect/disconnect

communication cables or power cables during lightning storms.

Dust
Do not operate the apparatus in areas with a high

concentration of dust.

Vibration
Do not operate the apparatus in areas with vibration or place it

on an unstable surface.

Power Connection and Hazardous Voltage
The product has hazardous voltage inside.

• Never attempt to open this product, or any peripherals

connected to the product, where this action requires a tool.

• This product should always be powered from an earthed

power outlet.

• Never connect attached power supply cord to other

products.

• In case any parts of the product has visual damage never

attempt to connect main power, or any other power source,

before consulting service personnel.

• The plug on the power cord serves as the main disconnect

device for this equipment. The socket-outlet shall therefore

be installed near the equipment and shall be easily

accessible

• Route the power cord so as to avoid it being walked on or

pinched by items placed upon or against it. Pay particular

attention to the plugs, receptacles and the point where the

cord exits from the apparatus.

• Do not tug the power cord.
• If the provided plug does not fit into your outlet, consult an

electrician.

• Never install cables, or any peripherals, without first

unplugging the device from its power source.

Servicing
Do not attempt to service the apparatus yourself because

opening or removing covers may expose you to dangerous

voltages or other hazards, and will void the warranty. Refer all

servicing to qualified service personnel. Unplug the apparatus

from its power source and refer servicing to qualified personnel

under the following conditions:

• If the power cord or plug is damaged or frayed.
• If liquid has been spilled into the apparatus.
• If objects have fallen into the apparatus.
• If the apparatus has been exposed to rain or moisture.
• If the apparatus has been subjected to excessive shock by

being dropped.

• If the cabinet has been damaged.
• If the apparatus seems to be overheated.
• If the apparatus emits smoke or abnormal odor.
• If the apparatus fails to operate in accordance with the

operating instructions.

Accessories
Use only accessories specified by the manufacturer, or sold

with the apparatus.

Communication Lines
Do not use communication equipment to report a gas leak in

the vicinity of the leak.

Statement 371 - Power Cable and AC Adapter

Cisco TelePresence MX Series

D14858.03

MX Series Regulatory Compliance and Safety Information October 2012.

Regulatory compliance and safety information guide

Contents

Introduction

Safety instructions

Approvals

China RoHS table

Contacts

Safety instructions