Руководство По Обслуживанию для Cisco Cisco TelePresence MX700
Set the Default SIP Message Size
The default SIP message size needs to be set to a high enough
value for Multistream to work. Multistream is a feature that enables
the endpoint to send and receive multiple streams of video at
different resolutions.
1. In CUCM, choose System > Service Parameters.
2. Choose the active server from the Server drop-down list.
3. Choose Cisco CallManager (Active) from the Service drop-
down list.
4. Click Advanced in the toolbar, since the message size is not
shown in the default view.
5. Scroll to the Clusterwide Parameters (Device - SIP) section.
6. Set the SIP Max Incoming Message Size parameter. We
recommend setting the paramter to 18000.
7. Click
Save.
Cisco TelePresence Endpoints and Cisco Unified Communications Manager
Deployment Guide
D15336.01 Deployment gude for TelePresence Endpoints on CUCM, DECEMBER 2015.
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
10
Contents
Introduction
CUCM configuration
Endpoint configuration
Appendices
Contact
CUCM configuration