Руководство По Обслуживанию для Cisco Cisco TelePresence MX700

D15331.04 MX700 and MX800 Administrator Guide CE8.2, OCTOBER 2016.

104

Cisco TelePresence MX700 and MX800

Administrator Guide

Cameras Camera [n..7] Flip

This setting applies to Camera [2..7] for single camera systems, and to HDMI [3..7] for dual

camera systems.
With Flip mode (vertical flip) you can flip the image upside down. Flipping applies both to

the self-view and the video that is transmitted to the far end.

Requires user role: ADMIN, USER
Default value: Auto

Value space: Auto/Off/On

Auto: If the camera detects that it is mounted upside down, the image is automatically

flipped. If the camera cannot auto-detect whether it is mounted upside down or not, the

image is not changed.
Off: Display the image on screen the normal way.
On: Display the image flipped upside down. This setting is used when a camera is

mounted upside down, but cannot automatically detect which way it is mounted.

Cameras Camera [n..7] Focus Mode

This setting applies to Camera [2..7] for single camera systems, and to HDMI [3..7] for dual

camera systems.
Define the camera focus mode.

Requires user role: ADMIN, USER
Default value: Auto

Value space: Auto/Manual

Auto: The camera will auto focus once a call is connected, as well as after moving the

camera (pan, tilt, zoom). The system will use auto focus only for a few seconds to set the

right focus; then auto focus is turned off to prevent continuous focus adjustments of the

camera.
Manual: Turn the autofocus off and adjust the camera focus manually.

Cameras Camera [1..7] Gamma Mode

This setting enables gamma corrections, and applies only to cameras which support

gamma mode. Gamma describes the nonlinear relationship between image pixels and

monitor brightness.

Requires user role: ADMIN, USER
Default value: Auto

Value space: Auto/Manual

Auto: Auto is the default and the recommended setting.
Manual: In manual mode the gamma value is changed with the gamma level setting, ref.

Cameras Camera [n] Gamma Level.

Cameras Camera [1..7] Gamma Level

By setting the Gamma Level you can select which gamma correction table to use. This

setting may be useful in difficult lighting conditions, where changes to the brightness setting

does not provide satisfactory results. Requires the Cameras Camera [n] Gamma Mode to be

set to Manual.

Requires user role: ADMIN, USER
Default value: 0

Value space: Integer (0..7)

Define the gamma level.

Introduction

Configuration

Peripherals

Maintenance

System settings

Appendices



System settings