Руководство По Обслуживанию для Cisco Cisco TelePresence MX700
D15331.04 MX700 and MX800 Administrator Guide CE8.2, OCTOBER 2016.
www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
25
Cisco TelePresence MX700 and MX800
Administrator Guide
Codec LEDs
System failure:
Lights steady (red) when there is a
serious problem with the codec.
Power:
Lights steady (white) when the codec
has power.
Sub-system failure LEDs
There are four LEDs underneath the
monitor(s). Normally, they are not lit.
A steady red light indicates serious error,
and you should contact the Cisco support
organization.
The LEDs mean (numbered from left to right):
1. Monitor failure.
2. Power failure for LCD monitor or camera
2. Power failure for LCD monitor or camera
sub-systems.
3. Power failure for audio sub-system.
4. Power failure for LCD monitor backlight.
4. Power failure for LCD monitor backlight.
Sub-system failure LEDs
Sub-system failure LEDs
Codec LEDs
You must remove the
You must remove the
side cover to be able to
see the codec LEDs.
The side cover is
fastened with magnets.
System LED
Blinking:
The video system is starting up.
Pulsating:
The video system is in standby mode.
Camera failure LED
Steady red light:
The camera has a serious error.
Sub-system failure LEDs
Sub-system failure LEDs
Codec LEDs
You must remove the
You must remove the
side cover to be able
to see the codec
LEDs.
The side cover
is fastened with
magnets.
System LED /
Camera failure LED
This LED operates as
This LED operates as
both system LED and
camera failure LED.
Camera failure LED
System LED /
Camera failure LED
This LED operates as
This LED operates as
both system LED and
camera failure LED for
the right camera in a
dual camera assembly.
LED indicators
MX700
(page 1 of 3)
Introduction
Configuration
Peripherals
Maintenance
System settings
Appendices
Introduction